AoB the OnLine HomeBrew SuperStore
Unbeatable Value and a Fast Efficient Service
Secure Card Payment system

BREWFERM GALLIA ALE beer kits - short dated, best before 30th June REDUCED to 12.95

View Cart | Checkout

Test Equipment & accessories

Ref: 888

In stock

This device can be used to directly measure the final alcohol in a wine. To use put a small sample of the wine in the funnel end, the wine will run down the capillary tube and start to drip from the far end. Wait until a few drips have come through and then turn the Vinometer upside down and place on a flat surface. The wine will drop back along the capillary tube and where it stops against the index is a direct reading of the percentage of alcohol by volume (ABV). If you put undiluted wine into the Vinometer the reading is a direct measurement of the alcohol content. However for a more accurate reading the wine can be diluted 50:50 with water, in which case you need to DOUBLE the reading. The range of the scale for undiluted wine is 0 to 25% ABV but clearly this can be extended by diluting the wine. Solids and particles in the wine can affect the reading. The unit should be thoroughly cleaned after use.


Price: 4.75 (Including VAT at 20%)

Quantity:

Ref: 879

In stock

You might find it easier to read the hydrometer by floating it in a TRIAL JAR filled with the wine or beer. Don't forget to sterilise both the hydrometer and the trial jar before use.


Price: 2.69 (Including VAT at 20%)

Quantity:

Ref: 882

In stock

Using a trial jar filled with a sample of the wine or beer makes it easier to read the hydrometer. Don't forget to sterilise both the hydrometer and the trial jar before use.


Price: 3.89 (Including VAT at 20%)

Quantity:

Ref: 889

In stock

The ideal way to take a sample from the fermenter. Can also be used for taking samples for hydrometer readings. To use: Clean and sterilise the Wine Thief and put it into the fermenter from which you want to take the sample, not right down to the bottom as you do not want to take in any yeast sediment. The tube will fill and because of the one-way valve in the tip it will not empty when you lift it out. If there is insufficient liquid in the tube try moving the Wine Thief rapidly up and down in the fermenter and it will fill to a higher level. To empty the Wine Thief actuate the one-way valve by pressing the tip of the Wine Thief against the side of the receiving vessel. To take a hydrometer reading you might be able to place your hydrometer directly into the Wine Thief tube or you can put the sample into a trial jar for taking the reading.


Price: 7.99 (Including VAT at 20%)

Quantity:

Ref: 877

In stock

Range -5°C to 110°C


Price: 2.99 (Including VAT at 20%)

Quantity:

Customers who bought this also bought:

Ref: 1504

In stock

Self-adhesive for applying to a vessel.


Price: 1.99 (Including VAT at 20%)

Quantity:

Ref: 431

In stock

Iodine solution for testing starch to sugar conversion when mashing beer from the grain.


Price: 7.99 (Including VAT at 20%)

Quantity:

Ref: 432

In stock

For testing beer wort when mashing from the grain. To test wine see the WINEMASTER WINE & BEER ACID TEST KIT.


Price: 6.49 (Including VAT at 20%)

Quantity:

Ref: 433

In stock

For testing beer wort when mashing from the grain. To test wine see the WINEMASTER WINE & BEER ACID TEST KIT.


Price: 6.49 (Including VAT at 20%)

Quantity:

Ref: 434

In stock

For testing beer wort when mashing from the grain. To test wine see the WINEMASTER WINE & BEER ACID TEST KIT.


Price: 5.99 (Including VAT at 20%)

Quantity:

Ref: 892

In stock

Titration kit.


Price: 5.99 (Including VAT at 20%)

Quantity:

Ref: 893

In stock

This is an N/10, or decinormal, solution. Replacement item for use with the RITCHIE WINE & BEER ACID TEST KIT.


Price: 1.89 (Including VAT at 20%)

Quantity:

Ref: 894

In stock

Replacement item for use with the RITCHIE WINE & BEER ACID TEST KIT.


Price: 1.89 (Including VAT at 20%)

Quantity: