AoB the OnLine HomeBrew SuperStore
Unbeatable Value and a Fast Efficient Service
Secure Card Payment system

View Cart | Checkout

Barrels and Accessories

Ref: 765

In stock

Please note there is no pressure inject valve with this beer barrel but it does have a pressure release valve in it's 2" cap to vent excess pressure. This product should not be placed where damage could occur in the event of any leakage. TIP: The best "off" position for the tap on this barrel is not where the lever is pushed fully back. If you look at the tap from above when the lever is pushed fully back it will be at the 2 o'clock position. If you bring the lever forward slightly to the 3 o'clock position this will give you the best seal.


Price: 26.49 (Including VAT at 20%)

Quantity:

Customers who bought this also bought:

Ref: 1920

In stock

This beer barrel is fitted with an S30 valve in it's 2" cap that includes a pin for use with 8g CO2 bulbs (the valve cannot be used with screw-on gas cylinders). To use 8g CO2 bulbs with this valve you will need to separately purchase an 8g GAS BULB HOLDER. The bulbs are available in most towns. Note that you only need to add gas if you have exhausted the natural pressure inside the barrel. This product should not be placed where damage could occur in the event of any leakage. S30 is a registered Trade Mark of Hambleton Bard Ltd. TIP: The best "off" position for the tap on this barrel is not where the lever is pushed fully back. If you look at the tap from above when the lever is pushed fully back it will be at the 2 o'clock position. If you bring the lever forward slightly to the 3 o'clock position this will give you the best seal.


Price: 33.49 (Including VAT at 20%)

Quantity:

Ref: 767

In stock

This small,16 pint, bottom tap beer barrel is useful for experimental or speciality brews. Please note there is no pressure inject valve with this barrel, just a pressure release to vent excess pressure in it's 2" cap. This product should not be placed where damage could occur in the event of any leakage. TIP: The best "off" position for the tap on this barrel is not where the lever is pushed fully back. If you look at the tap from above when the lever is pushed fully back it will be at the 2 o'clock position. If you bring the lever forward slightly to the 3 o'clock position this will give you the best seal.


Price: 25.99 (Including VAT at 20%)

Quantity:

Ref: 1710

In stock

This holder can be used to inject carbon dioxide gas from 8g CO2 bulbs into a barrel fitted with an S30 valve that includes a pin for piercing 8g CO2 bulbs. The bulbs are available in most towns. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 3.49 (Including VAT at 20%)

Quantity:

Ref: 1907

In stock

The colour of the cap we supply may be black or white. This cap is fitted with an S30 valve that has a piercing pin for use with 8g CO2 bulbs (the valve cannot be used with screw-on gas cylinders), you will also need to separately purchase an 8g GAS BULB HOLDER unless you already have one. S30 is a registered Trade Mark of Hambleton Bard Ltd. We recommend that you do not use this cap with the 2 gallon barrel as it would be easy to overpressurise that size of barrel.


Price: 12.49 (Including VAT at 20%)

Quantity:

Customers who bought this also bought:

Ref: 750

In stock

The colour of the cap we supply may be black or white.


Price: 4.69 (Including VAT at 20%)

Quantity:

Ref: 748

In stock


Price: 1.30 (Including VAT at 20%)

Quantity:

Customers who bought this also bought:

Ref: 907

In stock

This tap has a tapered thread and should only be used with the 2" cap barrels, that have an inbuilt threaded insert. Please note that no nut is supplied with this tap. TIP: The best "off" position for this tap is not where the lever is pushed fully back. If you look at the tap from above when the lever is pushed fully back it will be at the 2 o'clock position. If you bring the lever forward slightly to the 3 o'clock position this will give you the best seal.


Price: 3.39 (Including VAT at 20%)

Quantity:

Ref: 908

In stock

This tap cannot be used on barrels with 2" caps. The spout of this tap takes 3/8" (9mm) bore tubing. To fit to buckets and wide neck fermenters the hole size required is 1 inch (25.4mm).


Price: 4.49 (Including VAT at 20%)

Quantity:

Ref: 1806

In stock

This cap is fitted with an S30 valve that includes a pin for use with 8g CO2 bulbs (the valve cannot be used with screw-on gas cylinders). To use 8g CO2 bulbs with this valve you will need to separately purchase an 8g GAS BULB HOLDER. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 13.49 (Including VAT at 20%)

Quantity:

Customers who bought this also bought:

Ref: 1258

In stock

This cap is fitted with a standard S30 valve, i.e. no pin. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 12.99 (Including VAT at 20%)

Quantity:

Ref: 780

In stock

Please note that no "O" ring is supplied with this cap. If you need one please separately order an "O-RING FOR KING KEG 4" CAP" in this section.


Price: 3.99 (Including VAT at 20%)

Quantity:

Ref: 760

In stock

Not suitable for Brewmaster barrels.


Price: 1.99 (Including VAT at 20%)

Quantity:

Ref: 1774

In stock

This S30 valve is fitted with a piercing pin for use with 8g CO2 bulbs (the valve cannot be used with screw-on gas cylinders), you will also need to separately purchase an 8g GAS BULB HOLDER unless you already have one. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 8.99 (Including VAT at 20%)

Quantity:

Ref: 791

In stock

This is a standard S30 valve, i.e. no piercing pin. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 7.99 (Including VAT at 20%)

Quantity:

Ref: 763

In stock

Suitable for undoing King Keg and Brewmaster barrel caps, however it should never be used for tightening as it is easy to over-tighten.


Price: 8.79 (Including VAT at 20%)

Quantity:

Ref: 1819

In stock

Spare parts for S30 valves. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 5.75 (Including VAT at 20%)

Quantity:

Ref: 1818

In stock

Spare parts for S30 valves. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 3.99 (Including VAT at 20%)

Quantity:

Ref: 775

In stock

Spare part for S30 valves. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 0.49 (Including VAT at 20%)

Quantity:

Ref: 1820

In stock

Spare parts for S30 valves. S30 is a registered Trade Mark of Hambleton Bard Ltd.


Price: 4.99 (Including VAT at 20%)

Quantity: